#!/usr/bin/bash # This script assumes it will be launched within "/NAME/VERSION/src" dir. # With all sources in "src" Your Vector Linux .tlz package, slack-desc, # and slack-required will be found in "VERSION" dir. The extraction and # build will be in a temp dir created in "NAME" dir, and then removed on exit. # Comment out second to last line to keep this dir intact. # # This Template was compiled from the contributions of many users of the Vector # Linux forum at http://forum.vectorlinux.com and from tidbits collected # from all over the internet. # # Generated by sbbuilder-0.4.12.3, written by Rodrigo Bistolfi # (rbistolfi) and Raimon Grau Cuscó (Kidd) for VectorLinux. # # Please put your name below if you add some original scripting lines. # AUTHORS = NAME="gtk+2" #Enter package Name! VERSION=${VERSION:-"2.24.5"} #Enter package Version! VER=$(echo $VERSION|sed 's/-/_/') #this fixes - in version VL_PACKAGER=${VL_PACKAGER:-"hata_ph"} #Enter your Name! LINK=${LINK:-""} #Enter URL for package here! #SYSTEM VARIABLES #---------------------------------------------------------------------------- BUILDNUM=${BUILDNUM:-"1"} VL_VERSION=${VL_VERSION:-"$(ls /var/log/packages/|grep vlconfig2|cut -d "-" -f4|cut -c 2-5)"} BUILD=${BUILD:-"$BUILDNUM""$VL_VERSION"} ARCH=${ARCH:-"$(uname -m)"} CONFIG_OPTIONS=${CONFIG_OPTIONS:-""} LDFLAG_OPTIONS=${LDFLAG_OPTIONS:-""} ADDRB=${ADDRB:-""} #Add deps that need to be added to the slack-required file here EXRB=${EXRB:-""} #Add deps that need to be excluded from the slack-required file here #---------------------------------------------------------------------------- #SETUP PACKAGING ENVIRONMENT #-------------------------------------------- CWD=$(pwd) cd ../ RELEASEDIR=$(pwd) cd $CWD mkdir -p $RELEASEDIR/tmp TMP=$RELEASEDIR/tmp PKG=$TMP/package-$NAME #-------------------------------------------- if [ $UID != 0 ]; then echo "You are not authorized to run this script. Please login as root" exit 1 fi if [ ! -x /usr/bin/requiredbuilder ]; then echo "Requiredbuilder not installed, or not executable." exit 1 fi if [ $VL_PACKAGER = "YOURNAME" ]; then echo 'Who are you? Please edit VL_PACKAGER=${VL_PACKAGER:-YOURNAME} in this script. Change the word "YOURNAME" to your VectorLinux packager name. You may also export VL_PACKAGER, or call this script with VL_PACKAGER="YOUR NAME HERE"' exit 1 fi #CFLAGS SETUP #-------------------------------------------- if [[ "$ARCH" = i?86 ]]; then ARCH=i586 SLKCFLAGS="-O2 -march=i586 -mtune=i686" CONFIGURE_TRIPLET="i486-slackware-linux" LIBDIRSUFFIX="" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fpic" CONFIGURE_TRIPLET="x86_64-slackware-linux" LIBDIRSUFFIX="64" elif [ "$ARCH" = "powerpc" ]; then SLKCFLAGS="-O2" CONFIGURE_TRIPLET="powerpc-vlocity-linux" LIBDIRSUFFIX="" fi export CFLAGS="$SLKCFLAGS $CFLAG_OPTIONS" export CXXFLAGS=$CFLAGS export LDFLAGS="$LDFLAGS $LDFLAG_OPTIONS" #-------------------------------------------- #GET THE SOURCE #-------------------------------------------- for SRC in $(echo $LINK);do if [ ! -f $CWD/$(basename $SRC) ] then wget -c $SRC fi done #-------------------------------------------- rm -rf $PKG mkdir -p $PKG cd $TMP rm -rf gtk+-$VERSION #EXTRACT SOURCES #----------------------------------------------------- echo "Extracting source..." tar xvf $CWD/gtk+-$VERSION.tar.* || exit 1 #----------------------------------------------------- cd $TMP/gtk+-$VERSION # Put any Patches into a patches folder in the src dir #----------------------------------------------------- #for i in $CWD/patches/*;do # patch -p1 <$i #done #----------------------------------------------------- # Fix build errors zcat $CWD/fix_build_issues_on_tutorial_and_faq.diff.gz | patch -p1 --verbose || exit 1 # Do not flood the console or .xsession-errors with "trouble ahead" # warnings (most noticable when using Firefox and Flash): zcat $CWD/gtk.xid.nowarningflood.diff.gz | patch -p1 --verbose || exit 1 # Use /etc/gtk-2.0/$ARCH-slackware-linux instead of /etc/gtk-2.0/ for gtk.immodules zcat $CWD/use_host_triplet_for_gtk_immodules.diff.gz | patch -p1 --verbose || exit 1 # Patch to restore commonly used icon names, otherwise everything breaks. # I fail to see the point of this "cleanup" zcat $CWD/gtk+-2.24.x.icon-compat.diff.gz | patch -p1 --verbose || exit 1 zcat $CWD/gtk+-2.24.x.icon-compat.am.diff.gz | patch -p1 --verbose || exit 1 #SET PERMISSIONS #----------------------------------------- echo "Setting permissions..." chown -R root:root . find . -perm 664 -exec chmod 644 {} \; find . -perm 777 -exec chmod 755 {} \; find . -perm 2777 -exec chmod 755 {} \; find . -perm 775 -exec chmod 755 {} \; find . -perm 2755 -exec chmod 755 {} \; find . -perm 774 -exec chmod 644 {} \; find . -perm 666 -exec chmod 644 {} \; find . -perm 600 -exec chmod 644 {} \; find . -perm 444 -exec chmod 644 {} \; find . -perm 400 -exec chmod 644 {} \; find . -perm 440 -exec chmod 644 {} \; find . -perm 511 -exec chmod 755 {} \; find . -perm 711 -exec chmod 755 {} \; find . -perm 555 -exec chmod 755 {} \; #----------------------------------------- #CONFIGURE & MAKE #---------------------------------------------------------------------- # If you are building a KDE-related app, then change the following # arguments in the script below: # --prefix=$(kde-config -prefix) \ # --sysconfdir=/etc/kde \ # # Making these changes will ensure that your package will build in the # correct path and that it will work seamlessly within the KDE environment. # #----------------------------------------------------------------------- # Regenerate ./configure: libtoolize --force autoreconf -vif # Autoconf changes linux to linux-gnu. # Our host is $ARCH-slackware-linux not $ARCH-slackware-linux-gnu: sed -i -e 's#linux|linux-gnu|#linux|linux|#' config.sub echo "Configuring source..." ./configure --prefix=/usr \ --libdir=/usr/lib${LIBDIRSUFFIX} \ --infodir=/usr/info \ --sysconfdir=/etc \ --localstatedir=/var \ --mandir=/usr/man \ --disable-debug \ --disable-introspection \ --with-xinput=yes \ --enable-xkb \ --program-prefix="" \ --program-suffix="" \ --build=$ARCH-slackware-linux \ $CONFIG_OPTIONS || exit 1 make $NUMJOBS || make || exit 1 # Check the host value that is passed to the compile to the one in this script: host="$ARCH-slackware-linux" compile_host=$(grep 'host_triplet =' gtk/Makefile | sed -e "s/.* = //") if [ "x$compile_host" != "x$host" ]; then echo "Host mismatch: compile='$compile_host', SlackBuild='$host'" && exit 1 fi make install \ RUN_QUERY_IMMODULES_TEST=false RUN_QUERY_LOADER_TEST=false \ DESTDIR=$PKG \ || exit 1 ####################################################################### #Miscellenious tweaks and things outside a normal ./configure go here # ####################################################################### # You'll probably need to install the newly made package right away to # fix the result of this next line, but we had to clear this. Sorry. rm -rf /etc/gtk-2.0 # I'm spamming your root partition because /etc/gtk-2.0 won't install to $DESTDIR... make install cp -a /etc/gtk-2.0/* $PKG/etc/gtk-2.0/ || exit 1 rm -rf $PKG/etc/gtk-2.0/$host mkdir -p $PKG/etc/gtk-2.0/$host mv $PKG/etc/gtk-2.0/gtk.immodules $PKG/etc/gtk-2.0/$host/ # Don't clobber im-multipress.conf mv $PKG/etc/gtk-2.0/im-multipress.conf $PKG/etc/gtk-2.0/im-multipress.conf.new || exit 1 # Install a "starter" gtkrc echo 'gtk-theme-name="GTK+"' > $PKG/etc/gtk-2.0/gtkrc.new # We need to have separate 32-bit and 64-bit binaries # for places where we have two copies of the GTK+ package installed. # (we might have x86_64 and i486 packages on the same system, for example.) case "$host" in s390x*|x86_64*) mv $PKG/usr/bin/gtk-query-immodules-2.0{,-64} ( cd $PKG/usr/bin ln -sf gtk-query-immodules-2.0-64 gtk-query-immodules-2.0 ) ;; *) mv $PKG/usr/bin/gtk-query-immodules-2.0{,-32} ( cd $PKG/usr/bin ln -sf gtk-query-immodules-2.0-32 gtk-query-immodules-2.0 ) ;; esac # Install wrappers for the binaries: cp -a $CWD/update-gtk-immodules* $PKG/usr/bin chown root:root $PKG/usr/bin/update-* chmod 0755 $PKG/usr/bin/update-* # Add profile scripts to set up GTK+ environment: mkdir -p $PKG/etc/profile.d cp -a $CWD/profile.d/* $PKG/etc/profile.d chmod 0755 $PKG/etc/profile.d/* mkdir -p $PKG/usr/doc/$NAME-$VERSION cp -a ANNOUNCE* AUTHORS* BUGS* COPYING* ChangeLog* CHANGELOG* Credits* DEVELOPERS \ LICENSE* MANIFEST PROVENANCE README* TODO* Exception_to_GPL_for_Qt.txt \ $PKG/usr/doc/$NAME-$VERSION cat $CWD/$NAME.SlackBuild > $PKG/usr/doc/$NAME-$VERSION/$NAME.SlackBuild mkdir -p $PKG/install cp $CWD/doinst.sh $PKG/install #---------------------------------------------------------------------- if [ -d $PKG/usr/share/man ] ; then mkdir -p $PKG/usr/man mv $PKG/usr/share/man/* $PKG/usr/man rm -rf $PKG/usr/share/man fi find $PKG/usr/man -type f -exec gzip -9 {} \; if [ -d $PKG/usr/share/info ] ; then mkdir -p $PKG/usr/info mv $PKG/usr/share/info/* $PKG/usr/info rm -rf $PKG/usr/share/info fi find $PKG/usr/info -type f -exec gzip -9 {} \; mkdir -p $PKG/install if [ -d $PKG/usr/info ] ; then cat >> $PKG/install/doinst.sh << EOF CWD=\$(pwd) cd usr/info if [ -f dir ];then rm dir fi if [ -f dir.gz ];then rm dir.gz fi for i in *.info.gz;do install-info \$i dir done cd \$CWD EOF fi # Add schemas install to the doinst.sh if schemas are found. [ -d $PKG/etc/gconf/schemas ] && { # Make sure we have gconftool installed echo "if [ -x usr/bin/gconftool-2 ]; then" >> $PKG/install/doinst.sh ( cd $PKG/etc/gconf/schemas for schema in *.schemas; do # Install schemas echo "GCONF_CONFIG_SOURCE=\"xml::etc/gconf/gconf.xml.defaults\" \ usr/bin/gconftool-2 --makefile-install-rule \ etc/gconf/schemas/${schema} >/dev/null 2>&1" \ >> $PKG/install/doinst.sh done; ) # Finish off gconf block echo "fi" >> $PKG/install/doinst.sh } mkdir -p $PKG/install cat >> $PKG/install/doinst.sh << EOF # update rarian database if [ -x usr/bin/rarian-sk-update ]; then usr/bin/rarian-sk-update 1> /dev/null 2> /dev/null fi # update mime database if [ -x usr/bin/update-mime-database ]; then usr/bin/update-mime-database usr/share/mime 1> /dev/null 2> /dev/null fi # update desktop entries if [ -x usr/bin/update-desktop-database ]; then usr/bin/update-desktop-database 1> /dev/null 2> /dev/null fi # update hicolor icons if [ -e usr/share/icons/hicolor/icon-theme.cache ]; then rm -f usr/share/icons/hicolor/icon-theme.cache fi usr/bin/gtk-update-icon-cache -f -q usr/share/icons/hicolor 1>/dev/null 2>/dev/null if [ -x /usr/bin/glib-compile-schemas ]; then /usr/bin/glib-compile-schemas usr/share/glib-2.0/schemas/ >/dev/null 2>&1 fi # Restart gconfd-2 if running to reload new gconf settings if ps acx | grep -q gconfd-2 ; then killall -HUP gconfd-2 ; fi EOF #if there is a slack-desc in src dir use it if test -f $CWD/slack-desc; then cp $CWD/slack-desc $RELEASEDIR/slack-desc else # This creates the white space in front of "handy-ruler" in slack-desc below. LENGTH=$(expr length "$NAME") SPACES=0 SHIM="" until [ "$SPACES" = "$LENGTH" ]; do SHIM="$SHIM " let SPACES=$SPACES+1 done # Fill in the package summary between the () below. # Then package the description, License, Author and Website. # There may be no more then 11 $NAME: lines in a valid slack-desc. cat > $RELEASEDIR/slack-desc << EOF # HOW TO EDIT THIS FILE: # The "handy ruler" below makes it easier to edit a package description. Line # up the first '|' above the ':' following the base package name, and the '|' # on the right side marks the last column you can put a character in. You must # make exactly 11 lines for the formatting to be correct. It's also # customary to leave one space after the ':'. $SHIM|-----handy-ruler------------------------------------------------------| $NAME: $NAME (GIMP ToolKit) $NAME: $NAME: GTK+ is a multi-platform toolkit for creating graphical user interfaces. $NAME: Offering a complete set of widgets, GTK+ is suitable for projects ranging $NAME: from small one-off projects to complete application suites. $NAME: $NAME: $NAME: License: GPL $NAME: Authors: Refer to AUTHORS $NAME: Website: http://www.gtk.org/ EOF fi cat >> $RELEASEDIR/slack-desc << EOF #---------------------------------------- BUILDDATE: $(date) PACKAGER: $VL_PACKAGER HOST: $(uname -srm) DISTRO: $(cat /etc/vector-version) CFLAGS: $CFLAGS LDFLAGS: $LDFLAGS CONFIGURE: $(awk "/\.\/configure\ /" $TMP/$NAME-$VERSION/config.log) EOF cat $RELEASEDIR/slack-desc > $PKG/install/slack-desc #STRIPPING #------------------------------------------------------------------------------------------------------------------ cd $PKG echo " " echo "Stripping...." echo " " find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null #------------------------------------------------------------------------------------------------------------------ #FINISH PACKAGE #-------------------------------------------------------------- echo "Finding dependencies..." ADD="$ADDRB" EXCLUDE="$EXRB" requiredbuilder -v -y -s $RELEASEDIR $PKG echo "Creating package $NAME-$VERSION-$ARCH-$BUILD.txz" makepkg -l y -c n $RELEASEDIR/$NAME-$VERSION-$ARCH-$BUILD.txz cd $CWD echo "Cleaning up temp files..." && rm -rf $TMP echo "Package Complete" #-------------------------------------------------------------- # vim: set tabstop=4 shiftwidth=4 foldmethod=marker : ##