# Makefile.in generated by automake 1.11.1 from Makefile.am.
# doc/Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.




pkgdatadir = $(datadir)/aqualung
pkgincludedir = $(includedir)/aqualung
pkglibdir = $(libdir)/aqualung
pkglibexecdir = $(libexecdir)/aqualung
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
subdir = doc
DIST_COMMON = README $(srcdir)/Makefile.am $(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
SOURCES =
DIST_SOURCES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
man1dir = $(mandir)/man1
am__installdirs = "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(docdir)"
NROFF = nroff
MANS = $(man_MANS)
DATA = $(doc_DATA)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = ${SHELL} /home/ken/vectorlinux/mmbd/latest/std7.0mmdisk2.rebuild-2011-06-06/mmbdvl70std2-source/Programs/aqualung/R1160/tmp/aqualung-R1160/missing --run aclocal-1.11
AMTAR = ${SHELL} /home/ken/vectorlinux/mmbd/latest/std7.0mmdisk2.rebuild-2011-06-06/mmbdvl70std2-source/Programs/aqualung/R1160/tmp/aqualung-R1160/missing --run tar
AUTOCONF = ${SHELL} /home/ken/vectorlinux/mmbd/latest/std7.0mmdisk2.rebuild-2011-06-06/mmbdvl70std2-source/Programs/aqualung/R1160/tmp/aqualung-R1160/missing --run autoconf
AUTOHEADER = ${SHELL} /home/ken/vectorlinux/mmbd/latest/std7.0mmdisk2.rebuild-2011-06-06/mmbdvl70std2-source/Programs/aqualung/R1160/tmp/aqualung-R1160/missing --run autoheader
AUTOMAKE = ${SHELL} /home/ken/vectorlinux/mmbd/latest/std7.0mmdisk2.rebuild-2011-06-06/mmbdvl70std2-source/Programs/aqualung/R1160/tmp/aqualung-R1160/missing --run automake-1.11
AWK = gawk
CC = gcc
CCDEPMODE = depmode=gcc3
CFLAGS = -O2 -march=i586 -mtune=i686  -O2 -Wall  -DAQUALUNG_SKINDIR=\"${datarootdir}/aqualung/skin\" -DAQUALUNG_LOCALEDIR=\"${datarootdir}/locale\" -DAQUALUNG_DATADIR=\"${datarootdir}/aqualung\" -D_GNU_SOURCE
CPP = gcc -E
CPPFLAGS = -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng14   -pthread -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include   -I/usr/include/libxml2 -I/usr/include/alsa       -D_REENTRANT  
CXX = g++
CXXDEPMODE = depmode=gcc3
CXXFLAGS = -O2 -march=i586 -mtune=i686  -O2 -Wall  -DAQUALUNG_SKINDIR=\"${datarootdir}/aqualung/skin\" -DAQUALUNG_LOCALEDIR=\"${datarootdir}/locale\" -DAQUALUNG_DATADIR=\"${datarootdir}/aqualung\" -D_GNU_SOURCE
CYGPATH_W = echo
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = /bin/grep -E
EXEEXT = 
GREP = /bin/grep
INSTALL = /bin/ginstall -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
LDFLAGS =  
LIBAVCODEC_CFLAGS = 
LIBAVCODEC_LIBS = 
LIBAVFORMAT_CFLAGS = 
LIBAVFORMAT_LIBS = 
LIBOBJS = 
LIBS = -lxml2 -ldl -lpthread  decoder/libdecoder.a encoder/libencoder.a -pthread -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgio-2.0 -lpangoft2-1.0 -lpangocairo-1.0 -lgdk_pixbuf-2.0 -lm -lcairo -lpango-1.0 -lfreetype -lfontconfig -lgobject-2.0 -lgmodule-2.0 -lgthread-2.0 -lrt -lglib-2.0   -pthread -lgthread-2.0 -lrt -lglib-2.0   -lxml2 -lz -lm -ljack -lpthread -lrt   -llrdf   -lsamplerate   -lasound     -lsndfile   -lFLAC -logg -lvorbis -lvorbisfile -lwavpack -lm    -lmad  -lmpcdec -lstdc++ -lstdc++ -lavformat -lavcodec -lavutil -lz -logg -lvorbis -lvorbisenc -lmp3lame -lcdio_paranoia -lcdio_cdda -lcdio   -lcddb     -lz -lbz2 -llua -lpulse-simple -lpulse  
LTLIBOBJS = 
MAKEINFO = ${SHELL} /home/ken/vectorlinux/mmbd/latest/std7.0mmdisk2.rebuild-2011-06-06/mmbdvl70std2-source/Programs/aqualung/R1160/tmp/aqualung-R1160/missing --run makeinfo
MKDIR_P = /bin/mkdir -p
OBJEXT = o
PACKAGE = aqualung
PACKAGE_BUGREPORT = http://aqualung.factorial.hu/mantis
PACKAGE_NAME = aqualung
PACKAGE_STRING = aqualung SVN
PACKAGE_TARNAME = aqualung
PACKAGE_URL = 
PACKAGE_VERSION = SVN
PATH_SEPARATOR = :
PKG_CONFIG = 
PKG_CONFIG_LIBDIR = 
PKG_CONFIG_PATH = /usr/X11R6/lib/pkgconfig:/usr/X11R6/lib/pkgconfig:/usr/X11R6/lib/pkgconfig:/usr/local/lib/pkgconfig:/usr/lib/pkgconfig:/usr/local/lib/pkgconfig:/usr/local/lib/pkgconfig
RANLIB = ranlib
SET_MAKE = 
SHELL = /bin/sh
STRIP = 
VERSION = SVN
abs_builddir = /home/ken/vectorlinux/mmbd/latest/std7.0mmdisk2.rebuild-2011-06-06/mmbdvl70std2-source/Programs/aqualung/R1160/tmp/aqualung-R1160/doc
abs_srcdir = /home/ken/vectorlinux/mmbd/latest/std7.0mmdisk2.rebuild-2011-06-06/mmbdvl70std2-source/Programs/aqualung/R1160/tmp/aqualung-R1160/doc
abs_top_builddir = /home/ken/vectorlinux/mmbd/latest/std7.0mmdisk2.rebuild-2011-06-06/mmbdvl70std2-source/Programs/aqualung/R1160/tmp/aqualung-R1160
abs_top_srcdir = /home/ken/vectorlinux/mmbd/latest/std7.0mmdisk2.rebuild-2011-06-06/mmbdvl70std2-source/Programs/aqualung/R1160/tmp/aqualung-R1160
ac_ct_CC = gcc
ac_ct_CXX = g++
am__include = include
am__leading_dot = .
am__quote = 
am__tar = ${AMTAR} chof - "$$tardir"
am__untar = ${AMTAR} xf -
bindir = ${exec_prefix}/bin
build_alias = i486-slackware-linux
builddir = .
datadir = ${datarootdir}
datarootdir = ${prefix}/share
docdir = $(pkgdatadir)/doc
dvidir = ${docdir}
exec_prefix = ${prefix}
host_alias = 
htmldir = ${docdir}
includedir = ${prefix}/include
infodir = ${datarootdir}/info
install_sh = ${SHELL} /home/ken/vectorlinux/mmbd/latest/std7.0mmdisk2.rebuild-2011-06-06/mmbdvl70std2-source/Programs/aqualung/R1160/tmp/aqualung-R1160/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localedir = ${datarootdir}/locale
localstatedir = /var
mandir = /usr/man
mkdir_p = /bin/mkdir -p
oldincludedir = /usr/include
pdfdir = ${docdir}
prefix = /usr
program_transform_name = s&$$&&;s&^&&
psdir = ${docdir}
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
srcdir = .
sysconfdir = /etc
target_alias = 
top_build_prefix = ../
top_builddir = ..
top_srcdir = ..
var = yes
man_MANS = aqualung.1
doc_DATA = README split.sh aqualung-doc.css aqualung-doc.dtd aqualung-doc.xml *.xsl *.eps *.png
EXTRA_DIST = $(man_MANS) $(doc_DATA)
all: all-am

.SUFFIXES:
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --gnu doc/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
install-man1: $(man_MANS)
	@$(NORMAL_INSTALL)
	test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)"
	@list=''; test -n "$(man1dir)" || exit 0; \
	{ for i in $$list; do echo "$$i"; done; \
	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
	  sed -n '/\.1[a-z]*$$/p'; \
	} | while read p; do \
	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; echo "$$p"; \
	done | \
	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
	sed 'N;N;s,\n, ,g' | { \
	list=; while read file base inst; do \
	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
	  fi; \
	done; \
	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
	while read files; do \
	  test -z "$$files" || { \
	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
	done; }

uninstall-man1:
	@$(NORMAL_UNINSTALL)
	@list=''; test -n "$(man1dir)" || exit 0; \
	files=`{ for i in $$list; do echo "$$i"; done; \
	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
	  sed -n '/\.1[a-z]*$$/p'; \
	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
	test -z "$$files" || { \
	  echo " ( cd '$(DESTDIR)$(man1dir)' && rm -f" $$files ")"; \
	  cd "$(DESTDIR)$(man1dir)" && rm -f $$files; }
install-docDATA: $(doc_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(docdir)" || $(MKDIR_P) "$(DESTDIR)$(docdir)"
	@list='$(doc_DATA)'; test -n "$(docdir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(docdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(docdir)" || exit $$?; \
	done

uninstall-docDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(doc_DATA)'; test -n "$(docdir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	test -n "$$files" || exit 0; \
	echo " ( cd '$(DESTDIR)$(docdir)' && rm -f" $$files ")"; \
	cd "$(DESTDIR)$(docdir)" && rm -f $$files
tags: TAGS
TAGS:

ctags: CTAGS
CTAGS:


distdir: $(DISTFILES)
	@list='$(MANS)'; if test -n "$$list"; then \
	  list=`for p in $$list; do \
	    if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
	    if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
	  if test -n "$$list" && \
	    grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
	    echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
	    grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/         /' >&2; \
	    echo "       to fix them, install help2man, remove and regenerate the man pages;" >&2; \
	    echo "       typically \`make maintainer-clean' will remove them" >&2; \
	    exit 1; \
	  else :; fi; \
	else :; fi
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
check-am: all-am
check: check-am
all-am: Makefile $(MANS) $(DATA)
installdirs:
	for dir in "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(docdir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean-am: clean-generic mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-generic

dvi: dvi-am

dvi-am:

html-am:

info: info-am

info-am:

install-data-am: install-docDATA install-man

install-dvi: install-dvi-am

install-dvi-am:

install-exec-am:

install-html: install-html-am

install-html-am:

install-info: install-info-am

install-info-am:

install-man: install-man1

install-pdf: install-pdf-am

install-pdf-am:

install-ps: install-ps-am

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-generic

pdf-am:

ps: ps-am

ps-am:

uninstall-am: uninstall-docDATA uninstall-man

uninstall-man: uninstall-man1

.MAKE: install-am install-strip

.PHONY: all all-am check check-am clean clean-generic distclean \
	distclean-generic distdir dvi dvi-am html html-am info info-am \
	install install-am install-data install-data-am \
	install-docDATA install-dvi install-dvi-am install-exec \
	install-exec-am install-html install-html-am install-info \
	install-info-am install-man install-man1 install-pdf \
	install-pdf-am install-ps install-ps-am install-strip \
	installcheck installcheck-am installdirs maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
	pdf-am ps ps-am uninstall uninstall-am uninstall-docDATA \
	uninstall-man uninstall-man1


aqualung-doc: pdf html bz2 man txt

pdf: aqualung-doc.pdf

html: aqualung-doc.html index.html

bz2: aqualung-doc-html.tar.bz2 aqualung-doc-html-chunk.tar.bz2

man: aqualung.1

txt: aqualung.1.txt

aqualung-doc.pdf: aqualung-latex.xsl aqualung-doc.xml
	xsltproc aqualung-latex.xsl aqualung-doc.xml | sed -e 's/^[ \t]*@\?//' > aqualung-doc.tex
	while test `latex aqualung-doc.tex | grep 'Rerun' | wc -l` != 0 ; do : ; done
	dvipdf -sPAPERSIZE=a4 aqualung-doc.dvi

aqualung-doc.html: aqualung-xhtml.xsl aqualung-doc.xml
	xsltproc --stringparam date "`LANG=C date -u`" aqualung-xhtml.xsl aqualung-doc.xml | sed -e 's/^[ \t]*@//' > aqualung-doc.html

index.html: aqualung-xhtml-multipage.xsl aqualung-xhtml.xsl aqualung-doc.xml
	xsltproc --stringparam date "`LANG=C date -u`" aqualung-xhtml-multipage.xsl aqualung-doc.xml | sed -e 's/^[ \t]*@//' | ./split.sh

aqualung-doc-html.tar.bz2: aqualung-doc.html
	mkdir aqualung-doc-html
	cp aqualung-doc.html aqualung-doc.css *.png aqualung-doc-html
	tar cvjf aqualung-doc-html.tar.bz2 aqualung-doc-html
	rm -r aqualung-doc-html

aqualung-doc-html-chunk.tar.bz2: index.html
	mkdir aqualung-doc-html-chunk
	cp aqualung-doc-part_*.html index.html aqualung-doc.css *.png aqualung-doc-html-chunk
	tar cvjf aqualung-doc-html-chunk.tar.bz2 aqualung-doc-html-chunk
	rm -r aqualung-doc-html-chunk

aqualung.1: aqualung-man.xsl aqualung-doc.xml
	xsltproc --stringparam date "`LANG=C date -u +'%d %B %Y'`" aqualung-man.xsl aqualung-doc.xml | sed 's/^[ \t]*@\?//' > aqualung.1

aqualung.1.txt: aqualung.1
	man ./aqualung.1 | col -bx | sed 's/\$$  \+/\$$ /' > aqualung.1.txt

.PHONY: clean clean-all

clean:
	rm -f *.tex *.aux *.dvi *.log *.out *.toc

clean-all:
	rm -f *.html *.tar.bz2 aqualung.1 aqualung.1.txt *.pdf

upload: clean-all aqualung-doc clean
	@echo
	@ls
	@echo
	lftp -c 'set net:limit-rate 0:8000; open aqualung && cd manual && mirror -R -X .svn/ -X Makefile* -X *.sh'

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
