FatdogArm Alpha Release Notes

FatdogArm Alpha was released on 25 August 2013.

FatdogArm is a port of Fatdog64 to the ARM platform (the original porting process is documented here), targeted for desktop-style operation, and this alpha release is its first public release. This is an alpha-quality software release, so it is not meant for general end-user consumptions. Instead it is released "as is" for testers and tinkerers who may find the software useful, or for porting to another devices.


Target system

FatdogArm has been built and tested on Mele A1000 device but you may want to adopt FatdogArm to run on your favorite device as long as they are ARMv7-A compliant and have VFPv3 FPU.

In fact, at the time of writing, myself and mavrothal (forum member from Puppy Linux Forum) are currently adopting FatdogArm to run on XO laptop from OLPC (early progress here).

FatdogArm features

How to use the image

Unlike many other distributions out there, which provide compressed disk images which needs to be expanded and then written to a specific-sized SD Card, FatdogArm image is provided as uncompressed disk image which you can write (using dd) to your SD Card (fits any size) immediately - no decompression needed.

Once transferred to the SD Card (dd if=fatdog-arm-alpha.img of=/dev/your-SD-Card bs=4M), the SD Card is bootable immediately, booting directly to graphical desktop in about 15-30 seconds (depending on the speed of your SD card).

Before you do so, however, I recommend that you create a second partition on the SD Card (of any filesystem - but ext4 is preferred). Having the second partition enables you to save any changes you do when running FatdogArm. Without this second partition, all your work will vanish as soon as you shutdown the system.

When you shutdown for the first time, you will be asked on "where" to keep your changes. Choose the "mmcblk0p2" - your second SD Card partition - as the location to save to. If you created ext2/3/4 partition, you can use "save directory" feature; otherwise you have to use the "savefile" feature (slower).

WARNING: Don't use any of the "NAND" devices unless you know exactly what you're doing - these are the internal storage of your Mele and it contains Android OS and Data. Writing to them may make the Android unbootable, requiring Android re-flashing (your FatdogArm however will continue to work).

If you choose not to save, your changes in that session is discarded.

Known quirks and problems

  1. The system is configured to display on HDMI by default. If you want to change this, try to edit uEnv.txt on the FAT partition and change the "video" line. Failing this, you need to modify script.bin (by converting it to a FEX text file and back again); read the guide here. You can use this statically-compiled fex compiler/decompiler here - should work on any 32/64 bit x86 Linux).

  2. The SD Card (mmc) drive icons sometimes don't show up on the desktop. This happens when the SD Card is slow. To show it, right-click on any of the drive icons and choose "Redraw icons".

  3. Encrypted savefile is not supported yet, so do not attempt to enable encrypted savefile in the session shutdown dialog.

  4. Xine sometimes crash if you choose the wrong video driver. If you want to start Xine without playing anyfile, you need to use the SDL driver (start it from terminal like this: xine -V sdl). On the other hand, the SDL driver isn't so good when you want to play full screen (it will crash), so you will need to use "xv" or "xshm" driver to do that (set this from inside Xine's preference dialog). Yeah, annoying, I know.

  5. The sunxifb driver supports G2D acceleration (2D acceleration) but that's all about it. There is no 3D acceleration (Mali GPU) or video acceleration (Cedar VPU) so the most you can play is SD video upscaled to 720p; anything else will stutter.

  6. By default none of the memory is reserved for Mali an VPU so don't try to enable them (loading the module); this is done to maximise the available memory for applications. If you want to try them, make sure you edit uEnv.txt on the first FAT partition and modify the "extras" line to tell the kernel to do memory reservation.

  7. ROX Filer "Send To" right-clicks have many broken links - they points to applications which do not exist in FatdogArm (only in Fatdog64). This will be fixed as time goes.

  8. The is no GUI for configuring network. Right now the system will automatically start wireless network on wlan0 if there is an existing /etc/wpa_supplicant.conf (which must be created by hand or other means). Wired network isn't configured at all. Modify /etc/rc.d/rc.network to do this as needed.

Q & A

Q: Where is the documentation for FatdogArm?
A: None exist yet, but you can use this as a reference. Most of it are applicable (major exceptions: FatdogArm doesn't use humongous initrd, FatdogArm uses Slackware's pkgtool TBZ format instead of PET packages, installation procedures, etc).

Q: There are so many references to Fatdog64 both in window titles, messages, etc.
A: Yes, that's because FatdogArm is a port of Fatdog64 and uses many Fatdog64 tools. This will change overtime but don't expect it to happen soon.

Q: Is FatdogArm for 64-bit ARM archictecture (ARMv8) then?
A: No. It is currently built for 32-bit ARMv7 architecture.

Q: Is it softfloat or hardfloat?
A: Hardfloat, with VFPv3 FPU, Neon and Cortex-A8 optimisations.

Q: Will FatdogArm work on my tablets, settop boxes, devboards, etc?
A: While I have managed to get FatdogArm to run a particular tablet, do not expect this to be the norm. The reason is simple: every ARM device is different. But you may want to adopt FatdogArm to run on your favorite device :)

Q: Where is the devx.sfs?
A: There is no devx. The image contains gcc compiler (C and C++), binutils, make, and all the library headers - thus you can compile applications straight away. The static libraries have been removed to reduce the size, though. If you want them you need to re-install the packages from the repository. Also, if you need autoconf, automake, m4, cmake, flex and bison, they are available on the repository.

There is no svn/git/bazaar/mercurial, if you want them you have to build them yourself (I may build them and post them to the repository later).

Q: Is there any hardware acceleration (3D, VPU, etc) ?
A: Planned to, but not yet. Acceleration is very device specific, but FatdogArm is meant to be general; so any device-specific hardware acceleration will only be made available through repository and not in the base distribution.

Q: I don't want to boot to graphical desktop, I want to boot to console only.
A: Open uEnv.txt on the first FAT partition of your SD Card, then add "pfix=nox" to the end of the line that starts with "extras".

Q: I have a savefile but temporarily don't want to use it
A: Open uEnv.txt on the first FAT partition of your SD Card, then add the a new line that says savefile=savefile=none

Q: I want to save my session but I don't want to create a second partition, because some stupid operating system doesn't recognise SD Cards with more than one partition.
A: Sure, you can save your session on the first FAT partition too. But make sure you enlarge it first with your favorite partition tool - as shipped, there is only 2.8MB left on that partition.

Q: I have a question not listed here.
A: Drop me a message on my blog or on the Puppy Linux Forum.